Fabric parts for 2011-2015 Single BOB Ironman and Sport Utility Strollers.
- Seat, Canopy and Lowboy Cargo Basket sold separately.
- Seat covers everything from the footwell, safety harness and seat back.
- Canopy stays (frame hoops) sold separately from Canopy.
- NOT compatible with 2016 and newer -OR- 2010 and older BOB Strollers.
- Check your Serial Number or Contact Us with any questions.
Compatible Strollers based on Serial Number (Model, Serial Number range, Manufacture Date range listed below):
- BOB Ironman Stroller: AV000001 and higher (Late 2010/2011 - Sept. 2015)
- BOB Sport Utility Stroller: AU000001 and higher (Late 2010/2011 - Sept. 2015)
BOB (Britax) does not have a seat replacement instructional video for the 2011-2015 model year strollers. However, they do have one for 2016 and newer which can be viewed here. There are some subtle changes between these model years, but you may find this video very helpful. They do remove both sides of the fold release cable and shock release pins, but only one side is necessary with 2011-2015 models...read on.
Tips for removal of old seat and installation of new seat: Take some digital images of the key attachment points of the hardware so you will know how and where to put everything back upon installation of the new seat. Remove all of the associated hardware and place in a jar for safe keeping (in case new hardware is not included). Dismantle only one side of the fold release cable from the back of the shock release pin prior to removing the old seat (*see this video, ~1 minute in). There is no need to remove both sides of the cable. You just need to pull it out from the nylon loops under the old seat. You can leave it dangling from the side on which it is still secured until you feed it through the nylon loops under the new seat.
*Video link is for Swing Arm replacement, but the section relevant to the fold release cable starts about 1 minute into the video.