Complete seat replacement for 2011-2015 BOB Ironman Stroller Duallie in Yellow. Canopy and Lowboy Cargo Basket sold separately.
Compatibility based on Serial Number (ranges listed below)
- BOB Ironman Stroller Duallie Serial Number Range: AX000001 and higher
- BOB Sport Utility Stroller Duallie Serial Number Range: AW000001 and higher (Not, technically, designed for the SUS but is compatible. SUS & Ironman utilize the same Main Frame)
BOB (Britax) does not have a seat replacement instructional video for the 2011-2015 model year strollers. However, they do have one for 2016 and newer which can be viewed here. Same goes for their PDF instructions. The 2016 PDF replacement instructions can be found here. There are some subtle changes between these model years, but you may find the video and the PDF very helpful even though the video is for the Revolution model strollers. They do remove both sides of the fold release cable and shock release pins, but only one side is necessary with 2011-2015 models...read on.
Tips for removal of old seat and installation of new seat: Take some digital images of the key attachment points of the hardware so you will know how and where to put everything back upon installation of the new seat. Remove all of the associated hardware and place in a jar for safe keeping (in case new hardware is not included). Dismantle only one side of the fold release cable from the back of the shock release pin prior to removing the old seat (*see this video, ~1 minute in). There is no need to remove both sides of the cable. You just need to pull it out from the nylon loops under the old seat. You can leave it dangling from the side on which it is still secured until you feed it through the nylon loops under the new seat.
*Video link is for Swing Arm replacement, but the section relevant to the fold release cable starts about 1 minute into the video.